Archive for the ‘Air Conditioning’ Category

Oshawa Air Conditioning Tip: What to Do About Cool Spots

Monday, May 14th, 2012

Sitting on your couch watching TV should be an enjoyable experience, especially after a long day at the office. But, if your Oshawa air conditioner deposits an abnormally high volume of cold air directly onto your couch, making you shiver despite the 90 degree heat outside, you may have a cool spot.

Cool spots are an unfortunate side effect of modern air conditioning technology. They occur when HVAC systems are improperly sized or ductwork is improperly installed. Other factors like insulation, vent configuration or window placement can also contribute to the presence of a cool spot (and possibly some hot spots). So, what can you do about it? There are a few options, starting with a quick inspection of the space.

Checking for Common Problems

Your HVAC contractor will check a number of things. Most importantly, they’ll measure the size of your HVAC system and compare it to the dimensions and particulars of your house. Usually, in the case of cool spots, the problem is directly related to an oversized system. When it turns on, even for a few minutes, it produces more cold air than is necessary, flooding your home with cooling. The thermostat recognizes this and the system shuts off soon after turning on. As a result, you’ll feel fluctuation between cold and warm as the system fails to properly condition the space.

Modern systems are sized for your house at 100% capacity. So, when the system turns on, it should stay on for a substantial period of time, keeping your home cool. Turning off and on frequently is bad for the system and wastes energy (plus it produces those pesky cool spots). Keep in mind that hot spots can also occur if the system isn’t powerful enough.

Your HVAC contractor will also look for vent placement and duct configuration. Improper placement of vents can lead to pooling of cool air that creates cool spots. By checking for potential problems in the layout of your HVAC system, your contractor can determine if new vents or ducts are needed to solve the problem.

Fixing the Cool Spots

For now, you may just want to move to another part of the house. Cool spots rarely affect the entire space – they tend to cluster around vents and outlets and can usually be fixed by resizing or adjusting your system. However, only your Oshawa air conditioning contractor can tell you for sure what the best solution will be for your air conditioning issues so make sure to schedule an inspection.

Call Advantage Airtech Heating & Air Conditioning today if you have any questions about your air conditioning or ventilation system!

Quick Tips to Save Money on Air Conditioning in Ajax

Monday, May 7th, 2012

You’ve probably heard once or twice that the cost of running your Ajax air conditioner is more than that of any other single electrical device in your house. It’s well worth the investment, but there must be ways to cut the costs, right? With careful attention to how your AC operates and when you use, there are some things you can do to slash those costs. Here are a few of the easiest:

  • SEER Matters – What is this magical acronym you hear so much? SEER refers to how many BTUs your air conditioner can produce with a single watt of electricity. A low SEER device therefore uses a LOT more electricity to produce the same volume of cooling as a high SEER device. Since current devices offer SEER of 13 or higher (some are up to 20+), just about any upgrade will save you money relatively quickly if your current air conditioner has a rating of 8 or lower.
  • Program Your AC – If you have a single point analog thermostat, you’re wasting a LOT of electricity. You’re either paying to cool your house while it’s empty or you’re coming home to a roasting hot living space. Purchase a programmable unit and set the system to 85 degrees when you’re not home. With timers in most digital units, you can tell it when you’ll be home so that you walk into a cool, comfortable space without having to keep it cool all day long.
  • Use the Landscape to Your Advantage – Instead of relying solely on your air conditioner to keep the house cool in the summer, plant some trees and shrubs around the house to block the sunlight. Simply adding some shade to your property can directly reduce how much heat your home absorbs throughout the day and reduce how much your AC unit needs to work to keep you cool.
  • Ventilate Your Roof – A good third of the heat in your home is absorbed directly through the roof. To keep this heat from affecting the rest of your home, install a roof fan that ventilates the excess energy and keeps the attic at a steady temperature. Less heat up top means less cooling needed down low.

A good air conditioning system is effective no matter what the temperature does, so it’s easy to forget how big your bill will soon be. To avoid an overblown bill, keep an eye on your cooling and follow these simple tips to cut back on use. For more information about how to best utilize your AC in Ajax, call Advantage Airtech!

Newcastle HVAC Question: What Does an Air Handler Do?

Monday, April 30th, 2012

Your Newcastle HVAC system is a complex system filled with vital components tasked with keeping you comfortable. One of the most important of those component is the air handler – the device responsible for circulating the heated or cooled air produced by your system through the vents in your home and into each of your rooms.

The air handler is a metal box, usually consisting of a blower and the heating or cooling elements. It might also include dampers and sound attenuators along with an air filtration and humidity control system. The simplest air handlers are designed only to transfer the heated or cooled air to the various parts of your home, while the most advanced devices are designed to perfectly condition and clean that air as it is circulated.

 Types of Air Handler

There are a few different types of air handler as well, depending on the size of your Newcastle HVAC system and the nature of the heating and/or cooling used. Most homes, for example, use terminal units which consist of just an air filter, blower and coil. This very simple system is all you really need to heat and transmit air through your ductwork.

However, for larger systems, there are also makeup air units which use outdoor air instead of recirculated indoor air. There are also packaged and rooftop units which are designed to be placed outside. These devices are most commonly used for commercial applications when space is limited.

How the Air Handler Works

An air handler’s most basic component is a blower fan. This device is run by an AC electric motor and can be either single speed or variable speed depending on the size and scope of your air handler. The dampers on the fan will control the flow rate of the air going through the blower fan. Most residential blowers are part of the air conditioning or furnace system, while commercial systems often have multiple blowers to maintain steady airflow for a larger space.

Because an air handler passes all of the air that will go through your vents, it is the best place to install high quality MERV or HEPA filters to remove pathogens and contaminants. It is also a good place to install humidity control devices .

Your air handler is an incredibly important component in your home heating and cooling system. Without it, all that heated and cooled air you pay for each year wouldn’t reach you. So, make sure to keep your system in tip top condition. To schedule an annual maintenance visit, call Advantage Airtech Heating & Air Conditioning today!

Daily Light Savings Reminder

Friday, March 9th, 2012

Don’t forget to “Spring Ahead” this Sunday March, 11th. At 2am we will all set our clocks ahead one hour. Daylight Savings is also a great time to d0 some routine checks around your home.

  • Replace batteries in your smoke alarms and other battery powered devices, and check them for proper functionality.
  • Check your medicine cabinet for outdated prescriptions.
  • Clean out your refrigerator and freezer.

As the winter ends and spring weather starts we also advise a thorough inspection of your Air Conditioning system. When is comes to maintaining a well functioning AC system, there is nothing more important than making sure that you keep to a regular maintenance schedule for your air conditioning system. This will include both simple tasks that you can perform yourself and a more in-depth annual cleaning and inspection that will be carried out by an air conditioning professional.

Keeping up with this kind of maintenance is helpful in many ways. It keeps your air conditioning system functioning at the highest possible efficiency level, and it also reduces the chances that you’ll need emergency repairs in the future. And since both of these benefits save you money in the long run, it’s well worth the small investment to have someone come out to take a look at your system once a year.

These professional maintenance visits typically include a thorough inspection to check for leaks, wear and defects throughout the system. In addition, a full coil cleaning is generally included. On your own, however, you can also do things like clean out the vents once a month and make sure you change the filters on a regular basis.

Testimonial: Marc P. From Newcastle

Wednesday, September 21st, 2011

Marc P. from Newcastle was really wowed by our service team; we were glad to be able to help him with his new HVAC system. Here is what he wrote to us:

I just wanted to write a quick note saying how absolutely pleased we are with our new furnace and A/C unit. From start to finish the only word to describe everything is WOW ! An amazing job, everyone was friendly and courteous throughout the whole process. I would and have already recommended Advantage Airtech to any looking to buy/replace a furnace and or A/C system.

- Marc P.

Top 10 Mistakes People Make When They Buy HVAC Equipment: A Guide From Durham

Wednesday, September 14th, 2011

Every year millions of homeowners buy a new HVAC system for their home, and some of them live in Durham. Whether for heating, cooling or air quality, they make a huge investment in a new system that will be with them for years to come. Unfortunately, many of those people make big mistakes when buying their next system, so to help you avoid doing so, here are some simple things you should not do.

  1. Ignoring Air Quality – Air quality is about more than comfort. It affects the health of everyone in your home equally. Consider it carefully when installing a new system.
  2. Avoiding Even Heating and Cooling – One room being cooler or warmer than another is not okay. It’s bad for your system and bad for your home’s comfort level. Have ductwork checked before installation of a new HVAC system.
  3. Not Upgrading Your AFUE or SEER – New systems are highly efficient. Take advantage of that by buying one with a higher AFUE or SEER rating.
  4. Not Vetting Your Contractor – Always spend time checking up on your contractor, reading reviews and asking other customers how their experience was.
  5. Skipping the Service Agreement – Service agreements save money and help your system last longer. Don’t skip them.
  6. Buying the Cheapest Option Available – It may be tempting, but a cheap HVAC system is a bad idea if you want it to last and save you money in heating and cooling. Even a midrange system will save you money in only a few years with higher efficiency ratings.
  7. Picking the Same Model You Already Had – New models are stronger and more efficient. When possible, get an upgrade and your bills will reflect the difference.
  8. Waiting too Long to Buy – The longer you wait, the more you pay in heating and cooling bills for an old, worn down system. If you know you’re going to buy a new system, act fast to save the most possible money.
  9. Not Asking Questions – If you have a question, ask it. There is no such thing as a stupid question when looking for a new HVAC system.
  10. Ignoring Maintenance Recommendations – Maintenance recommendations are optional but almost always to your benefit. Research on your own before committing to anything, but don’t ignore the necessity either.

If you do things just right, your new HVAC system will last for years to come and provide steady, comfortable heating or cooling throughout that time. But, if you rush through things, make a hasty decision and neglect to do any research, you may have issues with your system in far less time than you’d like. Be smart and you’ll be rewarded.

How Do I Check for a Dirty Evaporator Coil? A Question From Uxbridge

Friday, September 9th, 2011

The evaporator coil is an essential piece of your Uxbridge home’s air conditioning system. It absorbs heat from air that passes over it, and that air then travels into your home to cool it. So if your coil is dirty or isn’t functioning properly, the cooling power of your air conditioning system is diminished. Fortunately, this problem is fixed easily by cleaning the evaporator coil. You can do this on your own or have a professional come in to take care of it.

Signs of a Dirty Evaporator Coil

The most obvious sign of a dirty evaporator coil is an overall drop in system pressure. As long as you know what constitutes a normal pressure for your system, you should be able to tell if the current pressure is below that level. If it is, a dirty evaporator coil is probably your culprit. You can also check the static pressure in your system to see if that is low, but this requires specialized equipment.

Even if you don’t notice any particular signs that your air conditioning system isn’t working properly, it’s a good idea to clean your evaporator coils once a year or so. This can help prevent any larger problems from developing in the future.

Finding Your Coil

Probably the hardest part of cleaning an evaporator coil is reaching it. Unlike your condenser coil, which is located in your outdoor condenser unit, the evaporator coil is found inside near the air handler or furnace. If you have the owner’s manual, there should be detailed instructions telling you where the coil is and how to safely access it.

Alternately, you can have an HVAC technician show you what to do the next time they come out to work on your system. Whatever you do, though, make sure that power to your AC unit is completely shut off before you start working on it. Once you’ve gained access to the coil, use a brush or vacuum attachment to remove any debris or sediment you find there.

The Importance of Maintenance

Cleaning your evaporator coil is only one part of the regular maintenance required to keep your air conditioning system in good working order for the foreseeable future. There are plenty of things you can do on your own, but it pays to have a professional come out once a year or so to check out the entire system and make any necessary repairs.

What Features Should I Look for When Buying an Air Conditioner? A Question From Columbus

Wednesday, September 7th, 2011

There are so many different types and styles of air conditioners on the market these days in Columbus, it can be difficult to figure out what features are worth paying attention to when it comes time to buy one for yourself.

Of course, the most important thing to do is make sure you get an air conditioner that’s appropriately sized for the space you’re trying to cool. But what should you look for beyond that? Here are a few features you might like to have on the unit you purchase:

  • Energy Efficiency – The more energy efficient your air conditioner is, the less your cooling costs will be. It’s as simple as that. So when you’re evaluating devices, remember that it’s worth paying a little bit more up front for a more energy efficient unit. It will save you money in the long run and you’ll be doing your part to help the environment.
  • Dehumidification – Just about every air conditioner controls humidity to a certain extent in addition to cooling. But some do this better than others. There are also air conditioners with separate dehumidification settings for those days that are more humid than hot. Even when you need both cooling and dehumidification, it’s nice to have control of each of these independently.
  • Timer – Being able to program your air conditioner to switch on and off at different times of day is more than just convenient; it will save you money. You don’t want to leave your air conditioner running all day when you’re not home, but it sure is nice to come home to the comfort of an air conditioned space. If your air conditioner has a timer, you can have both. Just set the unit to come on a half hour or so before you get home and you’ll enjoy cool, refreshing indoor comfort right when you get home without paying through the nose to keep your home cool when no one is there.
  • Easy-to-Use Controls – As simple as this one seems, you might be surprised at how inconvenient the controls on some air conditioners can be. So when you’re evaluating your options, make sure you research how easy each unit is to operate. This can definitely save you from plenty of frustration in the long run.

Air conditioners come in many different shapes and sizes. To make sure your decision works best in your home, do your research well in advance, and you can always ask the opinion of a local AC contractor.

Portable Air Conditioners: A Tip From Port Perry

Monday, September 5th, 2011

If you’re in the market for an air conditioner in Port Perry, you’re probably familiar with central and window air conditioning units. But did you know there was another option? While they’re not perfect for every situation, portable air conditioners can provide reliable, even cooling for many homes.

Advantages of Portable Units

Of course, the main reason to buy a portable air conditioner is that it’s, well, portable. With one of these units, you don’t have to worry about which room to put the air conditioner in. Instead, you can simply take it with you wherever you go in the house.

Many people like to keep a portable air conditioner in their bedroom to take the edge off at night without dropping the temperature as much as a window unit might. And most portable air conditioners are quieter to operate than common window units. Portable air conditioners also come in a wide variety of sizes, so you can easily find one that matches your needs.

Disadvantages of Portable Units

Unlike window air conditioners that are automatically installed to vent and drain outside of a building, a portable air conditioner requires special setup. That means that every time you move your unit, you’ll have to find somewhere to place the exhaust hose so that fumes don’t accumulate in the room. This also means that portable air conditioners can’t be used in rooms without access to windows or air vents.

The cooling power of most portable air conditioners is not quite on par with equivalent window units either. You’ll want to choose a portable unit with slightly more BTUs than if you were buying a window unit to take care of the same sized room. As a result, the portable unit may cost slightly more to operate during peak cooling months.

Extras to Look For

Of course, while the cost may go up slightly, there are a lot of benefits to owning a portable air conditioner. For instance, many portable air conditioners can be used independently to dehumidify a room without cooling. This is often helpful (and can save energy) when the temperature would be bearable if not for the humidity level.

You also want to make sure that your portable air conditioner really is portable. That means finding a model with wheels and handles or some other mechanism that makes it easy to move it from place to place. If you have more questions about the different types of air conditioners, contact your local AC contractor.

How to Use AC Most Efficiently: Some Suggestions From Markham

Friday, September 2nd, 2011

Air conditioning is definitely something most of us wouldn’t want to try and get through the summer in Markham without. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of astronomical cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative?

    Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.

  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a expense that most of us are resigned to paying, but there’s no reason to pay more than necessary with so many strategies available to save money.