Posts Tagged ‘Enniskillen’

Quick Tips to Save Money on Air Conditioning in Ajax

Monday, May 7th, 2012

You’ve probably heard once or twice that the cost of running your Ajax air conditioner is more than that of any other single electrical device in your house. It’s well worth the investment, but there must be ways to cut the costs, right? With careful attention to how your AC operates and when you use, there are some things you can do to slash those costs. Here are a few of the easiest:

  • SEER Matters – What is this magical acronym you hear so much? SEER refers to how many BTUs your air conditioner can produce with a single watt of electricity. A low SEER device therefore uses a LOT more electricity to produce the same volume of cooling as a high SEER device. Since current devices offer SEER of 13 or higher (some are up to 20+), just about any upgrade will save you money relatively quickly if your current air conditioner has a rating of 8 or lower.
  • Program Your AC – If you have a single point analog thermostat, you’re wasting a LOT of electricity. You’re either paying to cool your house while it’s empty or you’re coming home to a roasting hot living space. Purchase a programmable unit and set the system to 85 degrees when you’re not home. With timers in most digital units, you can tell it when you’ll be home so that you walk into a cool, comfortable space without having to keep it cool all day long.
  • Use the Landscape to Your Advantage – Instead of relying solely on your air conditioner to keep the house cool in the summer, plant some trees and shrubs around the house to block the sunlight. Simply adding some shade to your property can directly reduce how much heat your home absorbs throughout the day and reduce how much your AC unit needs to work to keep you cool.
  • Ventilate Your Roof – A good third of the heat in your home is absorbed directly through the roof. To keep this heat from affecting the rest of your home, install a roof fan that ventilates the excess energy and keeps the attic at a steady temperature. Less heat up top means less cooling needed down low.

A good air conditioning system is effective no matter what the temperature does, so it’s easy to forget how big your bill will soon be. To avoid an overblown bill, keep an eye on your cooling and follow these simple tips to cut back on use. For more information about how to best utilize your AC in Ajax, call Advantage Airtech!

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

Enniskillen Heating Contractor Tip: How a Furnace Works

Monday, December 12th, 2011

Do you know how your furnace works? Believe it or not, lots of Enniskillen homeowners probably can’t explain the operation of furnace. It probably isn’t at the top of your “to do” list. It’s only important to know that once you set your thermostat to a desired temperature, the furnace comes on and warms the house.

Let’s look at how a gas furnace works since natural gas is found in most U.S. households. Gas furnaces use natural gas or propane to provide energy used for generating heat.

When the temperature in your home falls below the level set on the thermostat, an electric pilot light automatically ignites to heat a burner inside the furnace. This burner uses gas to generate heat within a combustion chamber inside the furnace. After the furnace senses that the thermostat has triggered the flame and that it is properly lit, the actual spark (or ignitor) is turned off.

Simultaneously, a motor in the furnace pulls in air from an exchange or return, which could be a grill in the floor, ceiling, or wall of a house. That air flows through ducts into the plenum of the furnace. The plenum is on the opposite side of the heat exchanger from the burner.

Gas will typically burn for at least two minutes before the blower starts to disperse heat throughout your home. This extra time gives the air an adequate period of time to warm up and also so that cold air won’t be pushed through the vents into the rooms in your house at the start. After either the preset time (roughly two minutes) or pre-established temperature is reached, the blower’s motor is turned on and it blows air over the heat exchanger, which usually consists of a series of copper tubes or pipes. When a fan blows air onto the heat exchanger, the air is heated. This heated air is then blown through a series of ducts to heat your home via vents in the floor, walls or ceiling. Exhaust fumes from the combustion process exit the furnace through a gas flue or chimney.

Just as the heat in your home turns on when a certain temperature is reached, it also turns off after the rooms are warm enough, thanks to your thermostat. The thermostat again senses the temperature in the room. When the room warms up to the temperature set by you at the thermostat, the gas valve is switched off, stopping the flow of gas. After the gas is turned off, the blower motor will still run for a few minutes, allowing the heat exchanger to cool off a bit. In some furnaces, the blower motor never shuts off, but operates at low speed to keep air circulating throughout your home.

In a nutshell, your thermostat is the brain in your heating system and your furnace is the brawn, doing most of the work.

Tags: , , , ,
Posted in Heating | Comments Off

Common Furnace Problems: A Tip from Markham

Wednesday, November 9th, 2011

When it comes to the furnace in your Markham home, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Tags: , , , , , , , , ,
Posted in Heating | Comments Off

How Do I Reduce Dust in My Home? A Question From Durham

Wednesday, September 28th, 2011

Dust is everywhere in your Durham home. There is no way to stop it from occurring, so instead we turn to cleaning and filtration to keep the amount of dust circulating through the air to a minimum. Luckily, there are quite a few things you can do, even without installing new equipment, to reduce your dust levels.

Duct Cleaning

First on the list is regular duct cleaning. You dust your furniture and your floors, so why not clean out your ductwork? Properly cleaned ductwork is very important because of just how much stuff can build up in there over time. Imagine regular air flow in an enclosed space that never gets cleaned. How much dust and debris do you think could build up over the course of a year? Hint: it’s enough to keep a steady flow of dust in your indoor air.

Professional duct cleaning is important and should be done once every year or two depending on how often you use your home comfort system. However, you should also clean in and around the vents and ducts in your home where you can reach. This can be done weekly and will help immensely to reduce dust.

Filtration

Most air filters equipped with high quality HEPA filters work extremely well to remove dust from the air. Because HEPA filters can capture particles as small as 0.3 microns, they won’t just remove dust, but pollen, pet dander and even mold. Mold especially is a problem that occurs in far greater frequency in homes without filtration.

Simple air filtration is an affordable solution to a lot of different contaminants, so it’s a good fit for any home. However, there are more powerful systems as well that will reduce both dust and pathogens like bacteria – these purifiers use ionization to draw particles from the air electronically.

Humidity

Humidity imbalance can cause dust problems as well. Low humidity leads to more dead skin and dust in the house, while high humidity causes the development of dust mites. Properly regulating your humidity to slightly less than 50% will create a perfect environment in which less dust is created and circulated in your home.

The best way to reduce dust is to take a three pronged approach to indoor air quality. Cleanliness is always first on the list, but after that don’t neglect the value of filtration and proper humidity control. When used properly, these three things will ensure dust never bothers you again.

Tags: , , , , , , ,
Posted in Indoor Air Quality | Comments Off

Your HVAC System’s Condensate Drain Line: Some Pointers From Enniskillen

Friday, August 26th, 2011

There are a lot of components involved in a properly working HVAC system your Enniskillen home. One component that many people overlook is the drain line for the air conditioning system. Your air conditioning system has condenser coils that sweat the water drawn from the air in your home as it is cooled by your AC unit. These coils produce a significant volume of water, especially when it humidity is high, so a condensate drain pan is installed to capture the moisture and keep it from damaging your home.

A drain line from the drain pain out of your home is required to transfer all that extra water, but it can easily become clogged by debris in the area or simply from heavy condensation. If this happens, the drain line might need to be cleared or even replaced.

Inspecting your Condensate Drain Line

Full inspection of your drain line involves checking quite a few components, so I will point you to Inspectapedia for a thorough rundown of what you should look for (and some pictures to show you what you don’t want to see). But, in short, you want to look for evidence that your condensate drain is overflowing or that the liquid in your drain pan is backing up into the air handler.

You may also notice that there is no liquid coming out of the condenser – a sign that there may be a major problem in the system that needs immediate inspection. If this happens, make sure you check for blockages and if nothing is present, call a contractor.

Cleaning Your Drain Line

Each year, it is recommended that you clean your drain line to make sure it is clear and ready for the summer’s heavy cooling and high humidity. The simplest way to do this is to disconnect the drain line and attach a hose to blow the line clear. This can get a little messy, so make sure you dress for the occasion. Another option if you have a wet/dry vac is to attach the hose to the end of the drain line and suck free any moisture still in there. Most wet/dry systems have attachments for drain line clearing or you can order one.

If your drain line is not clearing properly or you think there may be structural damage suffered during the winter, call a professional for a more thorough inspection. If you have regular maintenance done on your AC system each spring, this should be part of the process so make sure you write down any questions you have for when the contractor visits your home.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Do I Need Surge Protection for My HVAC? A Question From Enniskillen

Friday, August 19th, 2011

You probably know that to keep your Enniskillen home HVAC system in good working order you need to keep up with regular maintenance. This includes things like changing air filters, cleaning out air ducts and clearing debris from both inside and outside the system. Surge protection for your system may not be something you think of immediately, but like those maintenance tasks, it’s an important part of keeping your equipment functioning properly over time.

How Surge Protection Works

Surge protection essentially shuts off your system in the event that power levels in the system rise suddenly and unacceptably. When a sudden increase in electricity occurs, any electronic device is at risk. But, unlike your stereo, your HVAC system costs thousands of dollars – no one wants to lose something so valuable to a surge that could have been prevented. That’s why a surge protector is so vital for your system.

The surge protector monitors the levels of electricity coming into your HVAC system. In the event that a surge occurs for any reason (faulty wiring, a lightning strike, etc.), the surge protector will immediately cut off power to the HVAC unit and shut all of the equipment down.

A Sizeable Investment

Your HVAC system was not an impulse buy. This is a collection of equipment that you probably spent a good deal of money on and that you rely on to keep your family comfortable throughout the year. When you look at it that way, it’s easy to see why it’s worth doing anything you can to protect your investment. Installing a surge protector is a relatively minor expense compared to the money and inconvenience it could save you by preventing serious damage to your HVAC equipment.

Proper Restart

Once a surge protector shuts off your HVAC system, you’ll need to restart it properly. The best thing to do is talk to the contractor who installs your system. They can walk you through the restart process step by step to ensure you know exactly what to do. After going through all that trouble installing a surge protector, the last thing you want is to make a mistake when turning it back on.

If you don’t already have a surge protector in place, call an HVAC professional today and learn what your system needs to be fully protected. It’s a small expense and a quick installation, so there’s no reason to put it off any longer.

Tags: , , , ,
Posted in Home Maintenance/Comfort | Comments Off

How to Use AC Most Efficiently

Friday, June 17th, 2011

Air conditioning is definitely something most of us wouldn’t want to try and get through the summer without. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of astronomical cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative?

    Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.

  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a major expense that most of us are resigned to paying, but there’s no reason to pay more than necessary with so many strategies available to save money.

Tags: , ,
Posted in Air Conditioning | Comments Off

How Often Do You Change Your Filters?

Wednesday, May 18th, 2011

The core component of any good air quality system is the filter. A good air filter removes almost all of the particles that inundate your home every day – from the pet dander that flakes off of your cats or dogs to the pollen released by plants both indoors and out.

But many homeowners are not aware of when they should change the filters in their air quality system. They know it should be done regularly, but how often and when do you ignore the manufacturer’s recommendation to ensure higher quality air?

Know Your Home

The first thing to consider is the size of your home and what types of contaminants you must deal with each day. Air testing helps with this, as does regular cleaning of the areas around your air filter, including your ductwork. If you don’t have any pets and don’t keep any plants inside, your biggest air quality issue is likely dust, and dust will only fill up the filters quickly if you have a large family.

However, if you have a lot of pets, multiple plants and a large family, the odds are that your filter is being put through the ringer every day – asked to filter out a tremendous number of contaminants. This is when you might need to change the filter more often.

Changing Your Filter

If you have a high quality HEPA filter, it’ll probably work for as long as it’s rated. Only lower quality filters or those not large enough for the space in which they are installed will fail early. However, keep in mind that a HEPA filter, even when it can last longer, should always be changed no later than the manufacturer’s recommended date.

For most homes that timeframe is about 6 months. However, some higher quality filters can last as long as 12 or even 18 months in the right conditions. If you use your air filter in conjunction with an air purifier, you should also have the cartridges changed out at the same time as your filter.

If you think you are changing your filters too often, you can always have your air tested to determine if the contaminants in your home require less filtration. Some home have filters larger than they need installed or lower grade filters that get changed too often unnecessarily. As long as your family is safe and healthy, you might as well try to save some money.

Tags:
Posted in Indoor Air Quality | Comments Off